The main principle of the pellet dryer is to evenly lay the materials on the mesh belt, and then drag them to move back and forth in the dryer by the transmission device. The hot air flows through the materials, and the water vapor is discharged from the dehumidification hole, so as to achieve the purpose of drying.
"It is no accident to meet you". Thank you very much for clicking on the "Jushang " official website in the vast information on the Internet. It would be a great honor for Jushang to provide you with [Pellet dryer] technical services! Next you will see the Pellet dryer technical information prepared by Jushang Pellet dryer technology for you. I hope it will be helpful to your choice!
The main principle of the pellet dryer is to evenly lay the materials on the mesh belt, and then drag them to move back and forth in the dryer by the transmission device. The hot air flows through the materials, and the water vapor is discharged from the dehumidification hole, so as to achieve the purpose of drying. The mesh belt adopts 12-60 mesh wire mesh belt, and the length of the box is composed of standard sections. In order to save space, the drying mechanism can be multi-layer. The common ones are two rooms and three floors, two rooms and five floors, with a length of 6-40m and an effective width of 0.6-3.0m.
Product structure:
The product is composed of mesh belt, transmission device, air inlet pipe, air outlet pipe, fan (hot air source is installed separately), etc.
working principle:
The material enters from the machine head and dries slowly. The linear speed of the mesh belt depends on the type and moisture content of the material. The air flow direction adopts negative pressure and porous air inlet to ensure the effective drying area, and the air flow velocity is evenly distributed to improve the drying effect. In order to obtain good drying effect and proper output, the moisture content of the material, the linear speed of the mesh belt, the air volume and the air temperature should be properly, reasonably and organically combined.
Scope of application:
This product is a common continuous drying equipment, which can be widely used in building materials, electronics and other industries. It is especially suitable for the drying of sheet, strip and granular materials with good air permeability. For the paste materials such as filter cake, it can also be dried after molding by granulator or extrusion mechanism.
Product advantages:
1. Pellet dryer, material retention time and feeding speed to achieve good drying effect.
2. The equipment is equipped with flexible pellet dryer, which can use mesh belt washing system and material cooling system.
3. Most of the air in the mesh belt dryer (pellet dryer) is recycled to save energy.
4. The unique air distribution device of the dryer makes the hot air distribution more uniform and ensures the consistency of product quality.
5. The heat source can be steam, heat transfer oil, point or gas hot blast stove.
Equipment parameters:
|
Specification and model |
WG6 |
WG8 |
WG10 |
WG12 |
WG16 |
WG20 |
WG24 |
WG30 |
|
Network bandwidth（mm） |
600 |
800 |
1000 |
1200 |
1600 |
2000 |
2400 |
3000 |
|
Length of drying section（m） |
6-12 |
6-12 |
6-16 |
8-16 |
8-22 |
10-26 |
12-30 |
12-40 |
|
Length of feeding section（m） |
1 |
1 |
1 |
1 |
1 |
1.5 |
1.5 |
2 |
|
Transmission section length（m） |
1 |
1 |
1 |
1 |
1 |
1.5 |
1.5 |
2 |
|
Dry surface（m2） |
3.6-36 |
4.8-48 |
6-80 |
7.2-96 |
12.8-105.6 |
20-260 |
28.8-360 |
36-600 |
|
Number of layers |
1-5 |
|||||||
|
Layer spacing mm |
400-600 |
|||||||
|
Bearing capacity |
90-200 Kg/m2 |
|||||||
|
Service temperature |
Carbon steel≤400 C°，Stainless steel≤600 C° |
|||||||
|
Evaporation intensity |
5-20Kilogram of water/m2.h |
|||||||
| Heat source |
Hot air, electricity and steam |
|||||||
|
Operating speed |
0.06-1m/min |
|||||||
|
Transmission powerKw |
1.1-2.2 |
1.1-2.2 |
1.1-2.2 |
1.1-3 |
1.5-3 |
1.5-4 |
3-7.5 |
5-11 |
|
Supporting equipment |
Conveying equipment, hot blast furnace, dust removal equipment, induced draft fan, etc |
|||||||
Thank you for browsing the China Gongyi Jushang Machinery Co., Ltd website [Pellet dryer] products! Jushang drying equipment is a Pellet dryer product supply enterprise. Since its establishment, it has been deeply engaged in the food and drug drying field and has tried to provide excellent service Pellet dryer products for The Kingdom of Denmark food and drug drying customers!
Thank you for your time!
If you are interested in our products and like to have further information, please do not hesitate to contact our offices or our international distributors
Kangdian Industrial Park, Gongyi City, Henan Prov,China
Phone: +86-13137152766
Email: 18539447368@163.com
Whatsapp: {whatsapp}
