The main principle of the pellet dryer is to evenly lay the materials on the mesh belt, and then drag them to move back and forth in the dryer by the transmission device. The hot air flows through the materials, and the water vapor is discharged from the dehumidification hole, so as to achieve the purpose of drying.
Dear customer Pellet dryer, we are glad that you have found us in a wide range of information! Here is the relevant information organized by Pellet dryer for you.
The main principle of the pellet dryer is to evenly lay the materials on the mesh belt, and then drag them to move back and forth in the dryer by the transmission device. The hot air flows through the materials, and the water vapor is discharged from the dehumidification hole, so as to achieve the purpose of drying. The mesh belt adopts 12-60 mesh wire mesh belt, and the length of the box is composed of standard sections. In order to save space, the drying mechanism can be multi-layer. The common ones are two rooms and three floors, two rooms and five floors, with a length of 6-40m and an effective width of 0.6-3.0m.
Product structure:
The product is composed of mesh belt, transmission device, air inlet pipe, air outlet pipe, fan (hot air source is installed separately), etc.
working principle:
The material enters from the machine head and dries slowly. The linear speed of the mesh belt depends on the type and moisture content of the material. The air flow direction adopts negative pressure and porous air inlet to ensure the effective drying area, and the air flow velocity is evenly distributed to improve the drying effect. In order to obtain good drying effect and proper output, the moisture content of the material, the linear speed of the mesh belt, the air volume and the air temperature should be properly, reasonably and organically combined.
Scope of application:
This product is a common continuous drying equipment, which can be widely used in building materials, electronics and other industries. It is especially suitable for the drying of sheet, strip and granular materials with good air permeability. For the paste materials such as filter cake, it can also be dried after molding by granulator or extrusion mechanism.
Product advantages:
1. Pellet dryer, material retention time and feeding speed to achieve good drying effect.
2. The equipment is equipped with flexible pellet dryer, which can use mesh belt washing system and material cooling system.
3. Most of the air in the mesh belt dryer (pellet dryer) is recycled to save energy.
4. The unique air distribution device of the dryer makes the hot air distribution more uniform and ensures the consistency of product quality.
5. The heat source can be steam, heat transfer oil, point or gas hot blast stove.
Equipment parameters:
|
Specification and model |
WG6 |
WG8 |
WG10 |
WG12 |
WG16 |
WG20 |
WG24 |
WG30 |
|
Network bandwidth（mm） |
600 |
800 |
1000 |
1200 |
1600 |
2000 |
2400 |
3000 |
|
Length of drying section（m） |
6-12 |
6-12 |
6-16 |
8-16 |
8-22 |
10-26 |
12-30 |
12-40 |
|
Length of feeding section（m） |
1 |
1 |
1 |
1 |
1 |
1.5 |
1.5 |
2 |
|
Transmission section length（m） |
1 |
1 |
1 |
1 |
1 |
1.5 |
1.5 |
2 |
|
Dry surface（m2） |
3.6-36 |
4.8-48 |
6-80 |
7.2-96 |
12.8-105.6 |
20-260 |
28.8-360 |
36-600 |
|
Number of layers |
1-5 |
|||||||
|
Layer spacing mm |
400-600 |
|||||||
|
Bearing capacity |
90-200 Kg/m2 |
|||||||
|
Service temperature |
Carbon steel≤400 C°，Stainless steel≤600 C° |
|||||||
|
Evaporation intensity |
5-20Kilogram of water/m2.h |
|||||||
| Heat source |
Hot air, electricity and steam |
|||||||
|
Operating speed |
0.06-1m/min |
|||||||
|
Transmission powerKw |
1.1-2.2 |
1.1-2.2 |
1.1-2.2 |
1.1-3 |
1.5-3 |
1.5-4 |
3-7.5 |
5-11 |
|
Supporting equipment |
Conveying equipment, hot blast furnace, dust removal equipment, induced draft fan, etc |
|||||||
The food and drug drying industry engineer team customizes for you
Raw materials are strictly controlled! Pellet dryer The quality of raw materials plays a decisive role! Jushang drying equipment has identified a number of Pellet dryer upstream suppliers with stable quality through years of production experience, and has carried out strict quality control on the products handled to ensure that Pellet dryer of advanced is provided to customers!
Product pre-sale strict quality inspection! No matter how perfect the management process is, there will be defective products occasionally. What Jushang people can do is, while optimizing the purchase and sales process, strict quality inspection, mass and multi-batch product inspection, to provide Pellet dryer of superior quality and ensure the implementation of food and drug drying solutions.
Thank you for your attention to the Pellet dryer product information on the China Gongyi Jushang Machinery Co., Ltd website, and welcome your valuable suggestions!
