The main principle of the medicinal material dryer used in the drying process is to use the heat pump evaporator to absorb the heat in the outside air, or to recover the residual heat of the exhaust gas during the drying process, and then carry (transfer) the energy to the drying box through the compressor to work.
Dear [Medicine dryer] customer! You are the 124531 guest visiting Jushang enterprise! Jushang has been committed to technical exploration and experience accumulation in food and drug drying since its establishment, and has provided efficient [Medicine dryer] products to hundreds of customers!
working principle:
The main principle of the medicinal material dryer used in the drying process is to use the heat pump evaporator to absorb the heat in the outside air, or to recover the residual heat of the exhaust gas during the drying process, and then carry (transfer) the energy to the drying box through the compressor to work. The hot air in the drying box is heated repeatedly to absorb the moisture in the material, cool and humidify itself, and then through the process of hot air dehumidification or condensation, The water in the material will be drained away by water, and the continuous drying of the material will be realized in the end. The output temperature of the good high is 85 ℃.
Scope of application:
The drying machine for medicinal materials is mainly used for drying, heating and heat treatment of product test articles by industrial and agricultural supply, scientific research, medical and health, laboratory and other units. The temperature of this drying oven can be adjusted from 10 ℃ to 300 ℃, and the temperature can be automatically controlled by the temperature control system in the oven. The digital dawn temperature controller is adopted, which is sensitive and reliable, easy to operate, and the digital display is more intuitive and clear. It is used as a test or supply line for laboratories of universities, medical and health, environmental protection and other scientific research departments, as well as for industry, mining and agriculture. This machine is equipped with an air blowing device. The air enters the working chamber from the air duct, which promotes the circulation and convection of hot air in the working chamber, thus having better temperature uniformity.
Equipment parameters:
|
Specification and model |
WG6 |
WG8 |
WG10 |
WG12 |
WG16 |
WG20 |
WG24 |
WG30 |
|
Network bandwidth (mm) |
600 |
800 |
1000 |
1200 |
1600 |
2000 |
2400 |
3000 |
|
Length of drying section (m) |
6-12 |
6-12 |
6-16 |
8-16 |
8-22 |
10-26 |
12-30 |
12-40 |
|
Length of feeding section (m) |
1 |
1 |
1 |
1 |
1 |
1.5 |
1.5 |
2 |
|
Transmission section length (m) |
1 |
1 |
1 |
1 |
1 |
1.5 |
1.5 |
2 |
|
Dry surface (m2) |
3.6-36 |
4.8-48 |
6-80 |
7.2-96 |
12.8-105.6 |
20-260 |
28.8-360 |
36-600 |
|
Number of layers |
1-5 |
|||||||
|
Layer spacing mm |
400-600 |
|||||||
|
Bearing capacity |
90-200 Kg/m2 |
|||||||
|
Service temperature |
Carbon steel ≤ 400 C °，Stainless steel ≤ 600 C ° |
|||||||
|
Evaporation intensity |
5-20 kg water/m2. h |
|||||||
| Heat source |
Hot air, electricity and steam |
|||||||
|
Operating speed |
0.06-1m/min |
|||||||
|
Transmission power Kw |
1.1-2.2 |
1.1-2.2 |
1.1-2.2 |
1.1-3 |
1.5-3 |
1.5-4 |
3-7.5 |
5-11 |
|
Supporting equipment |
Conveying equipment, hot blast furnace, dust removal equipment, induced draft fan, etc |
|||||||
Thank you for your attention the China Gongyi Jushang Machinery Co., Ltd website, and welcome your valuable suggestions , If you have any questions about Jushang Medicine dryer, please call Jushang technical engineer at [+86-13137152766].
Build long-term relationships and grow organically.
The right balance of people, process and technology allows us to consistently exceed customer expectations in terms of quality, precision, speed and cost. Let's talk about your next project and how we can meet your specific requirements.
Kangdian Industrial Park, Gongyi City, Henan Prov,China
Phone: +86-13137152766
Email: 18539447368@163.com
Whatsapp: {whatsapp}
